Measurement length 1000 mm to 4800 mm
? 0,8 mm stainless steel wire diameter
? Maximum 42V Power Supply
? High strength stainless steel wire
? Potentiometric Measuring
Or 0-10 VDC Analog Output
Or 4-20 mA Current Output
? 0,5 m/s maximum speed
? IP54 Protection class
? Shock/Vibration resistant
The AWP series are wire potentiometric position transducers that
turn a linear motion into a resistance variation. They are made of a
precision rotating potentiometer operated by a, winding or
unwinding, stainless steel wire. Optionally other stroke lengths,
cable length and socket connector can be requested.
TECHNICAL SPECIFICATIONS
Power Supply Max. 42 V
Stroke Length (mm)
1000, 2000, 3000, 4000, 4800
(Please ask us for other)
Maximum Speed 0,5 m/s
Resistance 5KΩ (Optional Other)
Output
Potentiometric
Or 0-10 VDC Analog Output
Or 4-20 mA Current Output
(Please ask us for other)
Linearity ± %0,25
Protection Class IP54
Process Temperature - 25 to +85 °C
Relative Humidity %10 to %90
Weight 1000 grams
2. The wire encoder must be mounted vertically in position, not be horizontally.
3. If there is a trickle of water (like a rain), the wire outlet must not be a drip of water upstream. If needed
please use guide rollers.
4. The wire should not be pulled in angular. If needed, please use guide rollers.
1. Do not release the wire suddenly, after pulling.
Guide
Roller
Guide
Roller
Failure to comply with these recommendations, the malfunctions that may occur will not be under the warranty.
